The daily maintenance of the dispenser will directly affect the service life of the dispenser. The maintenance of the dispensing machine when it is shut down has a great impact on the use of the dispensing machine, including the operation and attention points in the normal use of the process have an impact. The following are the daily maintenance steps of the dispensing machine:

1. Change the dispensing type and clean the hose channel. At this point, first close the glue valve, discharge the residue in the hose, pour the cleaning solvent into the glue storage bucket, start the equipment, discharge the solvent to clean the valve body according to the usual operation method.

2. If the air pressure intake is abnormal, if water gas is found, remove the water gas in the pressure regulating filter, or check whether the air pressure source is abnormal. Before using a large amount of glue, please try a small amount of glue to master the use skills of the product to avoid mistakes. When there is no problem with the test, then large-scale production; You can use the defoaming machine to eliminate the bubbles generated in the process of mixing, or you can stand for 10-20 minutes, so that the bubbles generated in the process of mixing are eliminated in time, and the greater the amount of mixed glue.

3. Please wipe the part of the machine regularly to improve the service life. The more glue, the faster the reaction, the faster the curing speed, should be reasonable according to the actual production situation, to avoid the waste of glue. Eliminate accidents and improve production efficiency. At present, liquid control technology and dispensing equipment has been widely used in various production fields of modern industry.

4. When the machine stops using for a long time, the power should be unplugged, which can not only prolong the service life of the machine, but also save a lot of electricity. With the rapid development of automation industry, liquid control technology and automatic dispensing equipment is also constantly developing to ultra-high precision control, diversification and specialization.

Note: clean after each use, you can see again, wipe with alcohol, often move parts of the best oil or butter, keep lubrication, if a long time does not need to polish glue, otherwise solidified in the LED glue machine, and money to clean, very troublesome.