At present, the important parts of the desktop dispensing machine used on the market are mainly divided into three points: dispensing controller, teaching box, three axis manipulator. Next, I'll introduce them to you.

Dispensing controller, mainly by adjusting the size of the output pressure value to control the size of the amount of dispensing and dispensing speed and other problems. In particular, it should be emphasized that pressure instability is the main reason for inconsistent glue output, so accurate control and stability of pressure is the key. For example, too high fluid pressure combined with too short an opening time can allow air to seep into the fluid, which can be prevented by lowering the fluid pressure.

Teaching box, portable teaching AIDS are synchronized with the automatic dispensing software built in the dispensing machine. The teaching box can be preset for dispensing path, residence time, lifting height, etc. After saving, circular dispensing operation can be carried out according to the program to improve production efficiency.

The three-axis manipulator is driven by motor, with fast movement speed and accurate positioning, which can realize the horizontal axis multi-point stop placement, the front and rear servo is easier to take out the product, the moving distance is large, and has the following characteristics:

1, electric adjustment, easy to operate;

2. The machine adopts fast up and down in the mold to take things, and slow down to place products and spout outside the mold to shorten the molding cycle, more stable performance and safer action;

3. Double arm structure can take parts and water outlet at the same time, or any arm can be used alone;

Desktop dispensing machine overall application range is very wide, such as mobile phone, semiconductor manufacturing one desktop dispensing machine main components, PCB electronic parts fixed and protection, LCD glass substrate packaging, battery packaging, speaker dispensing, quantitative liquid filling, LED dispensing, optical lens dispensing and packaging, metal parts bonding.